Each and every home uses energy in one form or the other. Statistics indicated that almost 50% of a home energy is used by its HVAC system (provides heating and cooling services in buildings) while 12% goes into the lighting. When you build a new home or renovate the older one, then you must acquire a number of energy-efficient features and these have been listed as below:
- Make Your Home Very Well Insulated
Insulation is a key to maintain heat in your home. Proper insulation, in the right quantity, will trap heat in your home and you no need not to pay any unnecessary heating costs.
There are wide ranges of insulation options that homeowners place in their homes, but some options are precisely designed for certain areas. Effective methods to insulate your home well can considerably reduce the heat loss while lowering down your heat bills. Discover the following factors to do this in your home:
Insulating your roof is an effective and simple method to diminish the heat loss and lower down your heating bills. This is only operative for minimum 40 hours and it pays for itself several times over.
By insulating the floorboards on the ground floor, you can cover the gaps among the striking boards and floors to reduce the draughts.
It is one of the effective and inexpensive methods to save energy in house. Controlled air circulation helps to decrease condensation, by permitting the fresh air to get in when needed.
- Pipes, Tanks and Radiators
Insulating the pipes and water tanks behind the radiators helps to decrease the amount of heat lost.
- Add More Ceiling Fans
Ceiling fans keep your home cool during summer season with their ‘wind-chill effect.’ In winter season, these fans save energy in the reverse setting by circulation the hot air that rises to the ceiling and blow it back down into the room.
You must install ‘Energy Star’ ceiling fans, as these fans circulate air with 20% more efficiency. The height of the ceiling fan should be at least 8 feet, as the ceiling fans move more air and cool at a lower speed as compared to smaller fans.
Thus, ceiling fans contribute significantly to home electricity consumption, specifically in the countries which have warm climate.
- Interchange the Older With New Fittings
Most of the people evade replacing the older CFL bulbs with energy-efficient LED bulbs, because the LED bulbs are too costlier. It is true that the cost of LED bulbs is five to six times’ costlier than standard bulbs. So, why to switch over LED Lighting? The need of hour is for energy-efficient substitutions and LED lighting is one of them and it constitutes of the following features:
- LED lights come with a 5 year guarantee.
- These lights have a longer life span i.e. around 50,000 to 80,000 hours.
- These lights are 80% more energy efficient as compared to conventional lighting.
LED lights have following advantages:
- These lights don’t comprise of any contaminated chemicals and is a very safe type of lighting for your property.
- These lights are recyclable and highly durable.
- These lights don’t produce much heat. This aspect has a great impact on cooling expenses.
Thus, by using LED lights you can reduce at least 60% to 85% in your energy bills.
- Diminishes the Exposure to Rays on Sun
One of the most effective and simplest ways to diminish the heat intrusion is to install the exterior shade. These can be permanent shades or any other structure that will help in blocking the direct rays of the sun. If you are constructing a new home, position the building of your house in such a way that a fewer windows must face towards the west.
The direct rays of the sun produce the same heat as a single bar radiator produces over each square meter of a surface, but to block 90% of the heat you can use effective shading. By shading the outdoor part of the building, you can reduce the temperature in summer and as a result, you can save a lot of energy. Thus, shading glass reduces the unwanted heat that is exposed by the rays of the sun.
Hence, use the Electrical Services, as the electricians are experts in handling all the electrical devices and appliances more responsibly, and as result, your home’s energy bills gets reduced to approx… 20%. So, always seek their services before buying energy rated equipment’s and appliances, as these consume far fewer energy than the standard one.
Author Bio: Elley Santhow is a blogger and works as an editor at Responseelectricianperth.com.au. He loves to write about home improvement, electrical and technology. Response Fire and Electrical Services provides a wide range of electrical services in Perth region.